Tuesday, 27 March 2012

how to set up a computer to computer (ad hoc) connection using factory defaults with no USB in Hp Printer

cable (Mac OS)
You can set up your printer on a wireless computer to computer (ad hoc) network using the default settings
even if you have no USB cable. Follow these steps to connect to the printer using the factory default
1. Print a wireless configuration page by holding down (Cancel button) for more than 2 seconds.
2. Open the AirPort Setup Assistant, and then follow the onscreen instructions for joining an existing
wireless network. Use hpsetup as the existing network to join.
3. Insert the Starter CD into the CD drive. The CD menu runs automatically.
If the CD menu does not start automatically, double-click the Setup icon on the Starter CD.
4. On the CD menu, click Install Driver.
5. On the Connection Type screen, select Wireless Network, and then click Done.
6. On the Welcome screen, click Continue.
7. Select Wireless from the printer list drop-down menu.
8. Select the printer in the printer name list, and then click Continue.
If the printer does not appear in the list, wait for a minute and then click Rescan.
9. Enter hpsetup as the network name, and then click Apply.
10. Select None for wireless security, and then click OK.
11. Click Send Settings to send the settings to the printer.

kind of any problem Call Us 
+1-855-517-2433(Toll Free)

1 comment: