Monday, 26 March 2012


The network configuration or wireless (some models only) status report shows the
network or wireless settings for the device.

NOTE: The network configuration or wireless status report is printed when you
print a self-test report. For more information, see Understand the self-test
diagnostic page.
1. General Information: Shows information about the current status and connection
type of the network, and other information, such as the URL of the embedded Web
server and the hardware address of the device.
Network Status: This setting can be Ready or Offline. When the setting is Offline,
it implies either that the IP is being assigned or negotiated by the DHCP server, or
that the AutoIP or the network is not available.
2. 802.3 Wired (some models): Shows information about your wired network
connection, such as the hostname, IP address, subnet mask, default gateway, and
server.
Link Configuration: The possible values are 10T/100T HalfDplx/FullDplx, 10T
HalfDplx, 100T FullDplx, and 100T HalfDplx.
3. 802.11 Wireless (some models): Shows information about your wireless network
connection, such as the hostname, IP address, subnet mask, default gateway, and
server.
4. Miscellaneous: Shows information, such as the administrator details.
mDNS: Shows information about the active Multicast Domain Name System
(mDNS) connection. mDNS services are typically used on small networks for
IP address and name resolution (through UDP port 5353) where a
conventional DNS server is not used.
SLP: Shows information about the current Service Location Protocol (SLP)
connection. SLP is used by network management applications for device
management. The device supports SNMPv1 protocol on IP networks.

No comments:

Post a Comment